| |
|
|
|
Asphalt Drum Mix Plant
|
|
MODEL NO. DM-30 to 150 tph
|
|
SALIENT FEATURES:
- Easy operation and less maintenance
- Designed for the international market
- Modern Drum mix Technology
- Produces high production rate
- Portable Stationery
- Low Dust Emissions
- Proper drying and Homogeneous Mixing of Aggregate
|
- Modular Design for Containerized transport
- Proper Asphalt Coating And Saving
- Easy to Operate
- Less Fuel Consumption
- Fully Automatic Computerized Control Panel Board
- Accuracy in Quality Control
|
|
| |
DRYING & MIXING UNIT |
|
The Dryer unit is long rotating cylindrical drum. It is mounted on sturdy and robust steel structure is having adjustable height legs to give proper degree to the unit for accurate results.
The rotation of Drum is through heavy –duty gearbox, coupled with motor through suitable coupling. The Drum is also supported by 4 Nos.of Trunnions rollers running on heavy-duty bearings. This drum is divided into two Zones viz.
- HEATING DRYING ZONE
- MIXING ZONE
The thermo-drum is completely insulated with ceramic glass wool and coverd with Stainless Steel sheet to prevent the losses and to save fuel as well as the life of the drum.
Before the mixing Zone suitable flame guard is provided to restrict the burner flame to reach up to the mixing Zone.The special 8mm thick ‘J’ type flight +’W’ type comb flights have been bolted in the zones in the Zigzag/strait pattern for best mixing.
DRYER BURNER
Thermo- drum Burner is the heart of the entire system hence its efficiency, ease of serviceability etc.are most important factors.
|
 |
SALIENT FEATURES:
- Two stage High&Low
- Capacity to reduce the moisture up to 0.5%and achieve 180 Deg Celsius for aggregate.
- Able to use LDO/FO/diesel as fuel.
- Nozzle cleaning is possible during running condition.
- Remote controlled & fully automatic operation.
|
|
FOUR BIN FEEDER UNIT
|
|
The hopper have been properly designed with slopes, allowing a constant discharge without bridge forming. The first bin meant for the small size aggregate or dust is fitted with vibratory motor to ensure the free flow. Each hopper is equipped with an adjustable opening door that determines the discharge quantity for the materials capacity in outlet, as a function of specific weight of materials.
The material is drawn out from the hoppers by means of extracting conveyer driven by a preset-able adjustable variable drive motor, coupled with worm gear boxes, that enables to increase or decrease the material out put as per the job mix formula requirements. It is also possible to increase or decrease the total capacity without varying the preset settings by means of master control.
The vibratory screen is assembled at the end of cold aggregate feeder for removal of oversized materials.
|
ASPHALT TANK UNIT
|
|
Fully insulated double walled tank is equipped with separate high-pressure electronic burner for heating the Asphalt and control unit capable of metering and spraying required quantity of bitumen at specified temperature.
The positive displacement jacketed Asphalt pump coupled with reduction gearbox and variable speed motor is provided with hot oil circulating system.
|
All the Asphalt carrying pipelines are hot oil jacketed and thoroughly insulated with asbestos tape. |
SALIENT FEATURES:
- External insulation with ceramic wool and covered with suitable thick sheet.
- Tested tube nest for diathermic oil circulation.
- Thermic duct, Manhole, lifting hooks, Breather pipe.
- Elecronic High-pressure jet burner.
- Heavy duty jacketed Asphalt pump.
- Thermometers.
|
ASPHALT TANK BURNER
|
Asphalt burners are fitted with remote control system to detect flame failure and have Electric spark ignition system.
The temperature is controlled trough thermostatic control device to heat bitumen in desired temperature range.
|
|
|
FEATURES OF ASPHALT TANK BURNER :
- Single stage
- Capacity to anteed Tank Temperature up to 160° C
- Able to use LDO/FO/ diesel as fuel.
- Remote controlled & fully automatic operation.
|
LOAD OUT HOT MIX MATERIAL CONVERYOR |
|
Mixed hot material taken out from mixer drum is carried by inclined hot conveyor belt & discharged into the Tipper/Truck through automatic Hydraulic surge storage hopper.
The surge storage hopper of approximately 350 to 1000 Kgs is provided at the discharge end of the conveyor.
The surge storage hopper is hydraulically actuated, for opening and closing hopper door and scrapper plate to scrape out the mixed material sticking to the conveyor.
|
MINERAL FILLER UNIT |
The piping is provided up to-coating zone in the thermo-drum.
The system is powered by a variable speed Motor coupled with gearbox to rotary valve and also synchronized with aggregates and bitumen.
The feeding of filler(lime/cement) is pneumatic by means of air blower. |
|
|
| |
CONTROL PANEL BOARD
|
 |
Insulated Control Cabin Fitted with Air Conditioner And Micro Controller Based Control Panel With Printer And Computer Affording Total Control Of The Keyboard With The Relevant Software. |
|
| |
SALIENT FEATURES:
- The plant is supplied with centralized Control Panel.
- All controls, including the motor control center circuit breakers, are provided in the control panel.
- The control Panel comprises of the Automatic Burner Controls, Aggregate and Asphalt Blending Controls, Motor Controls, Feeder Bin Controls and Electric Switchgear.
- All the parameters like, temperature of bitumen-hot mix material-exhaust gases and aggregate weight, asphalt percentage, hot mix material weight etc. are displayed on the control panel.
- It is equipped with protections like Single Phasing, Overload, fuses, Sequence Interlock etc.
- Load wise data can be printed on the printer provided in the panel.
|
|
|
|
| |
|
|
|
|
|
|
|
